Attaching Brackets To The Scopia Tip Gateway - RADVision SCOPIA TIP Deployment Manual

Attaching Brackets to the SCOPIA TIP Gateway

The brackets serve to secure the device to the rack's front posts.
Procedure
Step 1
Step 2
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
Figure 4-2
Position the device on a flat, horizontal surface. Make sure the device front panel faces
toward you.
Unscrew the two Phillips screws on either side of the device. See
Accessories required for mounting
Figure 4-3 on page 16.
Setting up the SCOPIA TIP Gateway | 15