Generating The Certificate Signing Request For The Scopia Tip Gateway - RADVision SCOPIA TIP Deployment Manual

Generating the Certificate Signing Request for the SCOPIA TIP Gateway

This procedure describes how to generate a certificate for the SCOPIA TIP Gateway, that
needs to be signed by the network administrator using a certificate authority certification.
Note
Using encryption is subject to local regulation. In some countries it is restricted or limited for
usage. For more information, consult your local reseller.
Before you begin
Upload all certificates for SCOPIA Management, including certificates signed by the CA to
identify SCOPIA Management, and root and intermediate certificates to identify the CA. See
"Generating the Certificate Signing Request for SCOPIA Management" on page 50
"Uploading SCOPIA Management Certificates into SCOPIA Management" on page 53
Procedure
Step 1
Step 2
Step 3
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
Access the SCOPIA Management administrator portal.
Select Devices > Devices by Type > Gateways and navigate to the gateway to create its CSR.
Select the Certificate tab.
and
for details.
Securing Your Video Network Using TLS | 56