Table of Contents
Advertisement
Before you begin
Before upgrading your video network devices, including endpoints, do the following:
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
•
Before upgrading a video device software, back up its configuration by retrieving its
configuration file. For more information on remote backups, see the .
•
Go to http://licensing.radvision.com/ to apply for and download your upgrade package.
•
If you upgrade to a major version, ensure you have a new license key. The upgrade
procedure is different when upgrading to a major new version compared with smaller
incremental upgrades. See
details.
•
Navigate to the device and select the Access tab. Enter a name and password for
automatic login to the video device during the upgrade process. We recommend using the
same name across the deployment.
Access the SCOPIA Management administrator portal.
Select the Devices tab.
Locate the video device as explained in the Administrator Guide for SCOPIA Management.
Select the device to be upgraded.
Select Manage > Upgrade Software.
Figure 7-1
At the prompt, select OK to shut down the video device for a few minutes. This disconnects
all active calls.
If there is no upgrade package in the dialog box, select Add.
Select Browse to search for the package you want to upload.
Updating License Keys of RADVISION MCUs or Gateways
Upgrading the software file of a device
for
Performing Maintenance Procedures | 68
Advertisement
Table of Contents
