Configuring The Gateway - RADVision SCOPIA TIP Deployment Manual

Step 5
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
Figure 5-7
Configure the SCOPIA Gateway settings as described in
Table 5-2 Configuring settings for the SCOPIA Gateway
Field Names
Name
Secure XML Connection using TLS If required, select to use TLS and thus secure the
Registration Name
Meeting Type Prefix
Secure connection using HTTPS

Configuring the gateway

Table 5-2 on page
Description
You can modify the name that identifies the SCOPIA
Gateway in SCOPIA Management.
exchange of XML messages and commands between the
SCOPIA Gateway and SCOPIA Management.
Note
Before selecting TLS, you must generate the
SCOPIA Management and SCOPIA Gateway
certificates.
After you select that checkbox, click Test Connection.
The name of this SCOPIA Gateway is automatically
generated by the system.
The prefix to dial to access this gateway.
Select this setting to encrypt the communication
between the gateway and the SCOPIA Management.
Before selecting HTTPS, you must generate the SCOPIA
Gateway certificates.
Configuring your SCOPIA Solution for Interoperability with Cisco Telepresence | 31
31.