During this procedure the network device shuts down for a few minutes causing all active calls
to be disconnected.
Some parameters are not backed up and cannot be restored:
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
•
IP address
•
IP mask
•
Default router IP address
•
MTU size - the size of the packets received from the gateway
•
DNS suffix
•
DNS primary address
•
DNS secondary address
Access the SCOPIA Management administrator portal.
Search for an online network device as explained in .
Select Devices > Devices by Type > Gateways.
Select the network device whose software version you want to restore.
Select Manage > Restore Previous Version.
The system informs you that all active calls on the device will be disconnected when you
begin the process.
Select Yes in the confirmation message.
The Update Log window opens showing the task progress
Figure 7-3
Progress of restoring a software package
(Figure 7-3 on page
70).
Performing Maintenance Procedures | 70