Table of Contents
Advertisement
Note
The CTMS is considered as an endpoint in the SCOPIA Management setup.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
Access the SCOPIA Management administrator portal.
Select the Endpoints tab.
Select Add > Add manually.
The Add Endpoint window appears.
Select the Cisco telepresence system in the Type list.
Figure 5-8
Configure the CTMS as described in this table.
Table 5-4
Configuring the CTMS
Field Name
Name
Description
Protocol
Cisco CTMS Configuration screen
Description
Enter a name used to identify the CTMS. This name is displayed in
the list of endpoints.
Enter any description text that you may have for the CTMS.
This field is pre-configured to IP (SIP) since the CTMS uses the SIP
protocol.
Configuring your SCOPIA Solution for Interoperability with Cisco Telepresence | 35
Advertisement
Table of Contents
