Table of Contents
Advertisement
Step 6
Step 7
Step 8
Step 9
Note
Retrieving the CTMS Prefix for SCOPIA Management
Configure the CTMS prefix (Directoy Number) in SCOPIA Management so it can identify calls
from the Cisco deployment when the CTMS is part of the deployment. For more information,
see
This procedure describes how to retrieve the CTMS Directory Number from the CTMS web
interface.
Note
This number is configured only by the personnel that installed the Cisco services or by the
customer's network administrator.
Procedure
Step 1
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
Field Name
Prefix
Location
Visible in the directory
of other endpoints
Select OK.
Once configured, the Endpoints tab displays a small icon
that this is a telepresence system, as well as dialing info numbers with relevant prefixes.
Repeat the prefix configuration for each service defined in the CTMS.
You can modify these settings at any time by selecting the CTMS name link in the All
endpoints list.
If the CTMS used in your telepresence is defined in the LDAP server, import the CTMS into
SCOPIA Management, as described in the Administrator Guide for SCOPIA Management.
Even if you previously imported the CTMS from the LDAP server, you must re-import
it to SCOPIA Management, in order to define it as part of a telepresence system and
not as a regular endpoint.
"Adding the CTMS to SCOPIA Management" on page
Login to the CTMS web interface.
Description
You must configure the prefix for each type of call:
•
For inbound calls, enter the CTMS Directory Number. To
locate the number, see
SCOPIA Management" on page
•
For outbound calls, enter the dial-in number for each service
defined in the CTMS. To locate the numbers, see
CTMS Routing Information for SCOPIA Management" on page
37.
Select the location of the telepresence system, from the list.
This is only relevant for deployments with multiple locations.
Select to display the CTMS in the corporate address book. The
CTMS is represented in the address book as a single endpoint.
Configuring your SCOPIA Solution for Interoperability with Cisco Telepresence | 36
"Retrieving the CTMS Prefix for
36.
near the CTMS name, indicating
34.
"Retrieving
Advertisement
Table of Contents
