RADVision SCOPIA TIP Deployment Manual page 34

Step 5
RADVISION | Deployment Guide for SCOPIA TIP Gateway Version 8.0
Figure 5-5
•
To modify the basic attributes of the device, select the link of the device in the Name
column, and select the Configure tab if present.
Enter or modify the basic settings for your device, as described in
Management then connects to the devices and retrieves additional information, such as the
version number.
Table 5-1 Configuring your device's basic settings
Field Name
Name
IP Address
Location
Adding a new video network device
Figure 5-6 Adding a new gateway
Description
Enter the name used to identify the device. This name will
be displayed in the list of devices.
Enter the device's management IP address, as configured
during device installation.
This is only relevant for service providers or deployments
with multiple locations.
Select the device's location.
Configuring your SCOPIA Solution for Interoperability with Cisco Telepresence | 29
Table 5-1. SCOPIA