Sony MVS-6000 User Manual page 163

whether to use a single color or two-color combination for the color matte
in the <Edge Matte> group.
For color mix operations, see "Carrying out a color mix for the key edge
fill matte" (page 164).
5
When emboss is selected for the edge type, adjust the color in the <Emboss
Fill> group.
To adjust matte 1 press [Matte1], and to adjust matte 2 press [Matte2], then
adjust the following parameters.
Knob Parameter
1 Luminance
2 Saturation
3 Hue
6
To make the edge soft, press [Soft Edge] to set it on, and adjust the
softness.
Knob Parameter
1 Soft
For a normal edge, when [Soft Edge] is enabled, [Key Drop] is kept on.
7
To make separate fine adjustments to the positions of the left, right, top,
and bottom of the source edge, press [Fine Key], to set it on, and adjust the
following parameters.
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
Knob Parameter
1 H Phase
2 V Phase
Adjustment
Luminance
Saturation
Hue
Adjustment
Edge softness
Parameter group [1/2]
Adjustment
Key top edge position
Key left edge position
Key right edge position
Key bottom edge position
Parameter group [2/2]
Adjustment
Key horizontal position
Key vertical position
Key Setting Operations Using Menus
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
Setting values
–2.00 to +2.00
–2.00 to +2.00
–2.00 to +2.00
–2.00 to +2.00
Setting values
Left edge position
value shown
Top edge position
value shown
163