Sony MVS-6000 User Manual page 208

2
3
4
Rotating the wipe pattern (Rotation)
You can rotate the pattern. There are three rotation modes, as follows.
Angle
This carries out a wipe with the pattern in a fixed angle.
The parameter Angle determines the angle of pattern rotation.
A value of –100.00 of the parameter Angle corresponds to one whole turn
counterclockwise; a value of +100.00 corresponds to one whole turn
clockwise.
208
Basic Procedure for Wipe Settings
The buttons in the device control block are assigned to the wipe position
setting as follows.
Table1: Buttons and assigned settings
Button name Setting
Wipe Wipe position for common transition.
Table 2: Buttons assigned to functions
Button name Function
POS Toggle Position on or off.
X, Y Fix the operating direction.
CTR Return the pattern position to the center of the screen.
Press the [WIPE] button, turning it on.
Press the [POS] button, turning Position on.
Move the trackball or joystick, to set the wipe position. By pressing the [X]
button, turning it on, you can restrict movement to the horizontal direction,
and by pressing the [Y] button, turning it on, you can restrict movement to
the vertical direction.
Angle off
Angle on