Sony MVS-6000 User Manual page 178

When using a color matte: Press the [MATTE FILL] button, setting it on. The
When using the key fill bus signal: Press the [MATTE FILL] button, turning
Selecting key source
• To use the key source paired with the key fill signal selected on the key fill
• To select key source independently of the key fill signal selected on the key
• To use as key source the same signal as the key fill signal selected on the key
178
Key Setting Operations With the Key Control Block
button lights green, and you can now set the parameters with the knobs.
Knob Parameter
1 Luminance
2 Saturation
3 Hue
When [Mix Color] is selected in the key fill Matte Adjust menu, you can
further adjust color 2.
When [Mix Color] is on, and the [MORE] button is lit amber
Knob Parameter
1 Luminance
2 Saturation
3 Hue
4 Size
When [Mix Color] is on, and the [MORE] button is lit green
Knob Parameter
1 Luminance
2 Saturation
3 Hue
4 Soft
it off.
To select the key fill signal, use the key bus buttons in the cross-point
control block.
bus, press the [AUTO SEL] button, turning it on. The pairing of the cross-
point buttons for key fill and key source is carried out in the Setup menu. (See
"Cross-Point Settings (Xpt Assign Menu)" in Chapter 19 (Volume 3).)
fill bus and paired with key source, hold down the key delegation button
[KEY1], then press the desired key row button in the cross-point control
block.
fill bus, select the SELF mode by pressing the [AUTO SEL] button and
Adjustment
Color 1 luminance
Color 1 saturation
Color 1 hue
Adjustment
Color 1 luminance
Color 1 saturation
Color 1 hue
Pattern size
Adjustment
Color 2 luminance
Color 2 saturation
Color 2 hue
Edge softness
Setting values
0 to 100
0 to 100
359 to 0
Setting values
0 to 100
0 to 100
359 to 0
0 to 100
Setting values
0 to 100
0 to 100
359 to 0
0 to 100