Bus Selection - Sony MVS-6000 User Manual

The basis of signal selection is to select, in a cross-point button row, the cross-
point button to which is assigned the desired signal.

Bus Selection

The key row is shared by multiple buses.
To assign a bus to the cross-point buttons in the auxiliary bus control block,
press one of the AUX delegation buttons to select the bus.
Note
When using the CCP-6224/6324, buses may be assigned with the cross-point
button rows for keys 1 and 2 as the auxiliary bus control block.
The following table illustrates the correspondence between buses and cross-
point button rows, and the delegation operations.
Bank
M/E-1
PGM/PST
M/E-1 PGM/
PST
Bus name Cross-point
button row
Background A bus Background A
row
Background B bus Background B
row
Key 1 bus Key row
Key 2 bus
Key 3 bus
Key 4 bus
Program bus Program row
Preset bus Preset row
DSK 1 bus DSK row
DSK 2 bus
DSK 3 bus
DSK 4 bus
Utility bus Key row
DME 1 video bus
DME 2 video bus
Delegation operation
−
−
Turn on the [KEY1] button
Turn on the [KEY2] button
Turn on the [KEY3] button
Turn on the [KEY4] button
−
−
Turn on the [DSK1] button
Turn on the [DSK2] button
Turn on the [DSK3] button
Turn on the [DSK4] button
Turn on the [UTIL] button
Turn on the [DME1] button
a)
Turn on the [DME2] button
a)
Signal Selection
97