Sony MVS-6000 User Manual page 117

When a key is inserted
Key
By means of a Setup menu setting, it is possible to preserve the key state while
carrying out the color matte mix.
When, with a key inserted, a key is selected in the next transition
Key
Setting the color matte
1
In the M/E or PGM/PST menu, select first VF7 'Misc,' then HF1
'Transition.'
The Transition menu appears.
2
Select [Preset Color Mix] in the <Transition Type> group.
3
In the <Preset Color Mix Fill> group, select one of the following.
Flat Color: monochrome color matte
Utility Bus: signal selected on the utility bus
4
When "Flat Color" is selected, turn the knobs to adjust the color matte.
Knob
2
Key fades out
When no key is selected
Preset color mix (transition including key)
Key state preserved
Preset color mix (when set to preserve key state)
Parameter Adjustment
Luminance Luminance
When a key is
selected as the next
transition
Key fades in
Key gradually
removed
Setting values
0.00 to 100.00
Color Matte Settings
117