Recalling Files - Sony MVS-6000 User Manual

A popup window for confirming file saving appears.
Note
When you save the files, all of the saved files in the logical drive is erased
immediately before the saving operations.
4
Press [Yes].
This starts the file saving operation. If there is no directory in the logical
drive, a directory is automatically created, and the files are saved within it.
A progress bar and numerical indication appear to show the progress of the
operation.
When the operation is completed, a popup window reading "Completed."
appears.
5
Press [OK].
To rename a directory
Select a directory in the list, and in the button area press [Rename].
In the keyboard window that appears, enter the new directory name, and press
[Enter]. The name of a directory is limited to eight characters.
Note
The following names cannot be used:
CON, PRN, AUX, CLOCK$, NUL, COM0, COM1, COM2, COM3,
COM4, COM5, COM6, COM7, COM8, COM9
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, LPT9

Recalling Files

You can recall all of the saved files on the hard disk drive into frame memory.
1
Carry out steps 1 and 2 of the procedure "Saving Files" (page 304).
Note
It is not possible to select a directory (logical drive) on which files are not
saved.
2
Press [Restore].
A popup window for confirming file recall appears.
External Hard Disk Drive Access
305