Sony MVS-6000 User Manual page 130

Multi format switcher system with ccp-9000 series center control panel

Hide thumbs Also See for MVS-6000:

Table of Contents

• If as a result of an auto transition, for example, the fader lever position does

not agree with the signal output, this is a non-sync state (see page 127) and

LEDs light at both end positions of the fader lever travel. Moving the fader

lever does not carry out a transition, but when the fader lever reaches the end

position the non-sync state is released, and it is now possible to carry out the

next transition. If the fader lever is moved in the direction away from the lit

LEDs, this carries out the next transition, over the remaining part of the fader

lever travel.

Executing a Transition