Sony MVS-6000 User Manual page 205

Pattern: Use the dedicated pattern.
4
Depending on the selection in step 3, set the following parameters.
• When Wipe is selected
Knob Parameter
1 Size
2 Soft
• When Pattern is selected
Knob Parameter
1 Size
2 Soft
3 Pattern
a) The patterns are the same as for a wipe. See "Wipe Pattern List" (page 362).
If you selected Pattern, you can also carry out the pattern selection by
pressing the [Mix Ptn Select] button in the Matte Adjust menu, to display
the Mix Ptn Select menu. Select any pattern appearing in the Mix Ptn
Select menu (wipe patterns 1 to 24) by pressing the appropriate button, and
you can then adjust the following parameters.
Knob Parameter
1 Size
2 Soft
5
If you selected Pattern in step 4, if required, the following modifiers can
be added. After selecting a wipe mix, skip to step 6.
• When turning [Position] on and setting the pattern position
Knob Parameter
1 Position H
2 Position V
a) See page 207.
• When turning [Multi] on and using replications of the same pattern
Knob Parameter
1 H Multi
Adjustment
Pattern size
Edge softness
Adjustment
Pattern size
Edge softness
Pattern number
Adjustment
Pattern size
Edge softness
Adjustment
Horizontal position
Vertical position
Adjustment
Number of repetitions of pattern
horizontally
Basic Procedure for Wipe Settings
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
a)
1 to 24
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
a)
–200.00 to +200.00
a)
–200.00 to +200.00
Setting values
1 to 63
205