Sony MVS-6000 User Manual page 62

4 DELAY button
2 Device selection buttons
a Timecode display
This shows the current time (CURRENT)
and the start and stop point timecode values
for the current reference device (START
TC, STOP TC). When you press a device
selection button, the button lights, selecting
the assigned device as the reference device,
and displaying its setting value.
In the case of the [SBOX] buttons, the
display does not change. The displayed
setting value depends on whether the
[TIMELINE] button is on or off, as follows.
When the [TIMELINE] button is on:
Displays the start and stop points of the
last set keyframe on the timeline. When
the keyframe number is changed and
the last register and keyframe change,
the display also changes. (timeline
setting mode)
selected button, the second button will be
62
Names and Functions of Parts of the Control Panel
1 Timecode display
CURRENT
START TC
STOP TC
DEV DEV DEV DEV DEV
1 2 3 4 5
FM1 FM2 SBOX SBOX
DELAY
CLIP CLIP 1 2
SET SET
START STOP SET
START STOP
TC TC DUR
TC TC
ALL
CUE REW PLAY FF
STOP
5 Editing
buttons
7 TIMELINE button
8 STOP button
6 External device
TIME
SHTL JOG VAR
LINE
STOP
DEV
6
SBOX
3
STB
OFF
REC
9 Search dial
3 SBOX buttons
When the [TIMELINE] button is off:
Displays the Cueup & Play (rewind
action) start and stop points.
b Device selection buttons
These buttons are used for selecting
assigned external devices or frame memory
clips. Each button can only be assigned to a
single device. Carry out the assignment in
the Setup menu (see "Overall Control
Panel Settings (Config Menu)" in Chapter
19 (Volume 3)). To select an assigned
device, press the corresponding button,
which lights green. To select more than one
device simultaneously, hold down the
button for the first selection, while pressing
the buttons for the other selections in turn.
The second and subsequent selected
buttons light amber. If you press another
button without holding down the first
the reference device and light green.
operation buttons
ENBL