Basic Menu Operations; Menu Organization; About The Top Menu List; Accessing Menus - Sony MVS-6000 User Manual

Multi format switcher system with ccp-9000 series center control panel
Hide thumbs Also See for MVS-6000:
Table of Contents

Advertisement

Basic Menu Operations

Menu Organization

Operations on the MVS-6000 switcher
system make frequent use of menu
operations.
This section describes the menus and their
interrelationships.
Overview
All detailed settings for basic operations
such as transitions, keys, DME, or wipes,
are made in menus. There are also menus
for carrying out general system control,
managing setting data, and initial setup.

About the Top Menu List

When the control panel is powered on, the
top menu list appears as shown below.
You can also display this by selecting VF1
'Top Menu List' after pressing the [HOME]
button at the upper left in the top menu
selection button area of the menu control
block.

Accessing Menus

You can use any of the following methods
to access a menu, and the initially displayed
68

Basic Menu Operations

To display the top menu
In the same way as for the top menu
selection buttons in the menu control block,
press each button to display the particular
top menu in the menu display.
The top menu list button is the same as the
default layout of the top menu selection
buttons. However, even if the assignment of
the top menu selection buttons is changed,
this does not affect the top menu list.
To shut down the menus
Press the [Shutdown] button at the lower
right.
This operation is the same as the shut down
operation in the top menu window.
For details, see "Shutting down the menus"
(page 87).
menu page depends on the method used.
• Pressing a top menu selection button in
the menu control block.
This displays the page you last accessed
in the particular menu. After initially

Advertisement

Table of Contents
loading

Table of Contents