Sony MVS-6000 User Manual page 156

2
3
Adjusting the window
Setting the window function on allows you to adjust the detection range used
to determine the key signal. When this function is off, the default range is used
for the key.
For an overview of the window, see "Chroma key window" (page 153).
156
Key Setting Operations Using Menus
In the <Color Cancel> group, set [Cancel Key] on.
The cancel key is now on, and you can now adjust the key signal for color
cancel.
Knob Parameter Adjustment
1 Clip Color cancel key reference level
2 Gain Color cancel key gain
Make the following settings, as required, in the <Color Cancel> group.
• When setting [Key Position] on and adjusting the color cancel key
edge position
Knob Parameter Adjustment
1 H Phase Move left and right edges of the
color cancel key simultaneously
2 Left Move left edge of the color cancel
key
3 Right Move right edge of the color
cancel key
• When setting [Window] on and adjusting the detection range of the
color cancel key
Knob Parameter Adjustment
1 Crop Crop value
2 Angle Angle value
For details of the crop and angle parameters, see "Chroma key window"
(page 153).
• When setting [Y Balance] on and adjusting the ratio in which Y
balance is added to the color cancel key
Knob Parameter Adjustment
1 Mixture Ratio of Y balance key
Setting values
0.00 to 100.00
–100.00 to +100.00
Setting values
Left edge position
value shown
–3.00 to +3.00
–3.00 to +3.00
Setting values
100.00 to 0.00
180.00 to 0.00
Setting values
0.00 to 100.00