Sony MVS-6000 User Manual page 215

The buttons in the device control block are assigned to the wipe position
setting as follows.
Table 1: Buttons and assigned settings
Button name
K1 CB1
K2
K3
K4
Table 2: Buttons assigned to functions
Button name
POS
X, Y
CTR
2
Press one of the buttons in Table 1 above, to select the wipe position to
which the operation applies. Multiple selection is possible.
3
Press the [POS] button, turning Position on.
4
Move the trackball or joystick, to set the wipe position. By pressing the [X]
button, turning it on, you can restrict movement to the horizontal direction,
and by pressing the [Y] button, turning it on, you can restrict movement to
the vertical direction.
To set the wipe position by a menu operation
1
Press [Position] in the Key1 Wipe Adjust menu, turning it on.
2
Set the following parameters.
Knob Parameter
1 Position H
2 Position V
a) See page 207.
To move the pattern from its current position to the center through
the course of a transition
Press [Auto Center] in the <Position> group, turning it on.
Setting
Wipe position for independent key 1 transition
Wipe position for independent key 2 transition
Wipe position for independent key 3 transition
Wipe position for independent key 4 transition
Function
Toggle Position on or off.
Fix the operating direction.
Return the pattern position to the center of the screen.
Adjustment
Horizontal position
Vertical position
Wipe Settings for Independent Key Transitions
Setting values
a)
–200.00 to +200.00
a)
–200.00 to +200.00
215