Sony MVS-6000 User Manual page 161

2
Select the edge type in the <Edge> group.
For an overview of the key edge modifications, see "Edge modifiers"
(page 143).
Normal: unadorned edge
Border: edge with border applied
Drop Border: edge with drop border applied
Shadow: edge with shadow applied
Outline: edge used as outline
Emboss: embossing effect applied to edge
If you select [Normal], skip to step 7.
3
Set the border width and other parameters.
When border or outline is selected: The setting parameters depend on
the key type and whether the separate edge function is enabled or not.
To enable the separate edge function, press [Separate Edge], setting it
on.
• Separate edge off
Knob Parameter
1 Width
3 Density
a) In the "4H mode" and when [Fine Key] (page 163) is on, the setting value range is 0.00
to 4.00.
b) When a wipe pattern key or key wipe pattern key is selected as the key type
• Separate edge on
The left, right, top, and bottom border or outline widths can be adjusted
independently. The separate edge function is only valid when a
luminance key, linear key, or chroma key is selected as the key type.
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
5 Density
a) In the "4H mode" and when [Fine Key] (page 163) is on, the setting value range is 0.00
to 4.00.
Adjustment
Width
Density
Adjustment
Top edge width
Left edge width
Right edge width
Bottom edge width
Density
Key Setting Operations Using Menus
Setting values
a)
0.00 to 8.00
b)
(0.00 to 100.00)
0.00 to 100.00
Setting values
a)
0.00 to 8.00
a)
0.00 to 8.00
a)
0.00 to 8.00
a)
0.00 to 8.00
0.00 to 100.00
161