Sony MVS-6000 User Manual page 224
Multi format switcher system
with ccp-9000 series center control panel
Hide thumbs
Also See for MVS-6000:
- User manual (37 pages) ,
- Operation manual (18 pages) ,
- User manual (262 pages)
Table of Contents
Advertisement
Mosaic: In the first half of the transition, a mosaic is gradually applied to the
Defocus: In the first half of the transition, the old video is gradually defocused,
Brick: A brick such that the side surface is visible slides in over the old video,
User programmable DME: Using a DME keyframe effect created with a
In an independent key transition, you can use the following patterns. It is not
possible to use two-channel mode patterns.
Execution mode
One-channel mode
User programmable DME in transition mode
For the transition mode set when creating a keyframe effect for a user
programmable DME pattern, the following can be used.
• Single: single transition mode
• Flip tumble (Flip Tumble): flip tumble transition mode
• Dual: dual transition mode
• Picture-in-picture (PinP): one-channel and two-channel picture-in-picture
• Compress: a type of picture-in-picture, in which the new image is the
• Frame in-out (Frame I/O): frame in-out transition mode. When the first
• Frame in-out H (Frame I/O H): a type of frame in-out mode, which is
224
Overview
old video, then at the 50% point the inner image changes to the new video.
In the second half, the mosaic effect on the new video is gradually reduced,
returning to the original image at 100%.
(Pattern number: 1701 (one-channel mode))
then at the 50% point the inner image changes to the new video. In the
second half, the defocusing effect on the new video is gradually reduced,
returning to the original image at 100%.
(Pattern number: 1702 (one-channel mode))
then rotates so that the new video can be seen.
(Pattern numbers: 2801 to 2804, 2811 to 2814 (two-channel mode))
keyframe operation, this executes a DME wipe.
Pattern numbers: 1901 to 1999 (one-channel mode), 2901 to 2999 (two-
channel mode)
For details of creating keyframe effects, see "Creating User
Programmable DME Patterns" (page 249).
DME wipe patterns that can be used
Slide, squeeze, door, 2D trans, 3D trans, frame in-out, and user
programmable DME
transition mode
background, and the currently visible image shrinks, and then expands to its
original size. (See example in the next item.)
transition completes, if you move the position of the image, you can move it
both horizontally and vertically.
specified when creating a transition effect in the horizontal direction.
The image movement is reflected at both the transition start point and end
point. (See page 226.)
Advertisement
Table of Contents
