Image Data Management; Pair File Processing - Sony MVS-6000 User Manual

Image Data Management

You can carry out the following operations on the files in which images are
saved.

• Pair file processing

• Move
• Delete
• Rename
Note
During playback of a frame memory clip of the pair assigned to either of the
target FM selection buttons (see page 286), frame memory operations may not
be performed properly. Carry out frame memory operations after stopping clip
playback.

Pair File Processing

You can create a pair file from two single files. In the reverse direction, you
can split a pair file into two single files.
Couple: You can create a pair file from two single still image files or clip files.
Separate: You can also separate a pair file into two single still image files or
clip files.
Creating a pair file from two single files
Note
Carrying out the following operation automatically switches [Pair] to On.
The following description applies to the case of FM1&2, but the procedures are
similar for the other cases.
1
In the Frame Memory >Still >Recall menu or Frame Memory >Clip
>Recall menu, recall the two single files you want to convert to a pair file,
to FM1 and FM2.
2
In the Frame Memory menu, select VF4 'File' and HF1 'Pair
Recombination.'
The Pair Recombination menu appears.

Image Data Management

299