6.2 STATUS
b) STATISTICS
PATH: ACTUAL VALUES
REMOTE DEVICE
Statistical data (two types) for up to 16 programmed remote devices is shown here.
The StNum number is obtained from the indicated remote device and is incremented whenever a change of state of at
least one DNA or UserSt bit occurs. The SqNum number is obtained from the indicated remote device and is incremented
whenever a GSSE message is sent. This number will rollover to zero when a count of 4 294 967 295 is incremented.
PATH: ACTUAL VALUES
DIGITAL COUNTERS
Counter 1
The present status of the eight digital counters is shown here. The status of each counter, with the user-defined counter
name, includes the accumulated and frozen counts (the count units label will also appear). Also included, is the date and
time stamp for the frozen count. The
6
PATH: ACTUAL VALUES
SELECTOR SWITCHES
The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.
PATH: ACTUAL VALUES
FLEX STATES
6-6
STATUS
REMOTE DEVICES STATISTICS
1
REMOTE DEVICE
StNum:
REMOTE DEVICE
MESSAGE
SqNum:
STATUS
DIGITAL COUNTERS
Counter 1
Counter 1
MESSAGE
Counter 1
MESSAGE
YYYY/MM/DD HH:MM:SS
Counter 1
MESSAGE
COUNTER 1 MICROS
STATUS
SELECTOR SWITCHES
SELECTOR SWITCH 1
POSITION: 0/7
SELECTOR SWITCH 2
MESSAGE
POSITION: 0/7
STATUS
FLEX STATES
PARAM
Off
PARAM
MESSAGE
Off
PARAM 256: Off
MESSAGE
Off
D60 Line Distance Protection System
REMOTE DEVICE 1(16)
1
0
1
0
DIGITAL COUNTERS Counter 1(8)
ACCUM:
0
FROZEN:
0
FROZEN:
MICROS:
0
value refers to the microsecond portion of the time stamp.
Range: Current Position / 7
Range: Current Position / 7
Range: Off, On
1: Off
Range: Off, On
2: Off
↓
Range: Off, On
6 ACTUAL VALUES
6.2.10 DIGITAL COUNTERS
6.2.11 SELECTOR SWITCHES
6.2.12 FLEX STATES
GE Multilin