Transducer Inputs And Outputs - GE D60 Instruction Manual

6 ACTUAL VALUES
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The above actual values are displayed without the corresponding time stamp as they become available per the recording
rate setting. Also, the recording post-filtering setting is applied to these values.

PATH: ACTUAL VALUES METERING
 DCMA INPUT xx

Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.

PATH: ACTUAL VALUES METERING
 RTD INPUT xx

Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
GE Multilin
PMU 1 IC:
0.0000 kA, 0.00°
PMU 1 IG:
0.0000 kA, 0.00°
PMU 1 I1:
0.0000 kA, 0.00°
PMU 1 I2:
0.0000 kA, 0.00°
PMU 1 I0:
0.0000 kA, 0.00°
PMU 1 FREQUENCY:
0.0000 Hz
PMU 1 df/dt:
0.0000 Hz/s
PMU 1 CONFIG CHANGE
COUNTER: 0

TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA

TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
D60 Line Distance Protection System
Range: 0 to 65535

6.3.9 TRANSDUCER INPUTS AND OUTPUTS


DCMA INPUT xx

RTD INPUT xx
6.3 METERING
6
6-19