Ail Differential (Air/Glid Except 1-Ail) - FUTABA T12K Instruction Manual

AIL DIFF.
The left and right aileron differential can be
adjusted independently.
For gliders, the differential rate in butterfly
mixing can be adjusted.
● Select [AIL DIFF.] at the Model menu
and access the setup screen shown
below by pushing the RTN button.
● Select the function name
and return to the Model
menu by pushing the RTN
button or pushing the
HOME/EXIT button.
RETURN
● Aileron left/right
adjustment
Setting method
●Aileron left/right adjustment
Move the cursor to the aileron (AIL) 1~4 left (or
right) setting item and push the RTN button to
switch to the data input mode.
Adjust the aileron angles by scrolling the Push
dial when the stick is moved to the left (or
right) end.
Initial value: 100%
Adjustment range: 0~120%
*When the RTN button is pushed for one second, the rate is
reset to the initial value.)
Push the RTN button to end the adjustment
and return to the cursor mode.
140 <Model Menu (Airplane/Glider/Multirotor Functions)>
[Corresponding model type]: Airplane/glider, 2 ailerons or more
[Airplane (2A+2F)]
[Glider (4A+2F)]
AIL1
(Main Aileron)
AIL 3
(Chip Aileron)
*The display screen is an example. The actual
screen depends on the Model Type.
<Push Dial>
(Currently selected condition name)
AIL 2
(Main Aileron)
AIL 4
(Chip Aileron)
Scrolling
● Moving cursor
● Selecting mode
● Adjusting value
● To input data mode
● Data is entered
● To next page