Table of Contents
Advertisement
TELEMETRY MONITOR set up
① The HOME/EXIT button is pushed from HOME screen and TELEMETRY
MONITOR is called.
② Move the cursor to the "RECEIVER" or "SENSOR" (SBS-XXX etc.) and
push the RTN button.
③ You will use the "Display" function to choose how many sensors are
shown on your Telemetry monitor.
④ If you want to show two sensors on your Telemetry screen, select 2 in
"Display". Then move down to the Sensor to select which other item is
shown.
When using a sensor that has two or more functions, you will want to
scroll to select which will be displayed. (ALTITUDE,VARIO, etc.)
⑤ If you want to show three sensors on your Telemetry screen,
select 3 in "Display". Then move down to the Sensor to select
which other item is shown.
⑥ To SENSOR " ----------" selection will reduce a display item.
If a cursor is moved to items (Rx-BATT,
EXT-VOL, TEMP. etc.) and RTN is pushed,
the alarm setting screen of the item will be
displayed.
[ Display position ]
1
1
2
1
3
2
4
<Functions of Linkage Menu>
103
Advertisement
Table of Contents
