FUTABA T12K Instruction Manual page 93

Subtrim setting procedure
Subtrim can be set on the last page of the swash
setting screen.
*The sub-trim value set here is reflected at sub-trim of the
linkage menu.
Pitch adjustment procedure
The pitch adjustment function can be used on the
last page of the swash setting screen.
1. Call the last page of the swash setting
screen.
2. W h e n t h e c u r s o r i s m o v e d t o a p i t c h
adjustment button and the RTN button is
pushed, the corresponding pitch is output.
* In the pitch adjustment mode an * is displayed at the left
side of the current output setting button.
*If the cursor is moved to another button and the RTN button
is pushed during pitch adjustment, the pitch adjustment
mode is deactivated.
Function details are as follows:
Button Function
High High pitch fixed output mode
Neutral Neutral pitch fixed output mode
Low Low pitch fixed output mode
Moving Cyclic pitch output mode
*The cyclic pitch speed can be set with the button at the right
side of the "Moving" button.
Setting range: 1 to 100
*When the set value is large, motion becomes fast and when
the set value is small, motion becomes slow.
<Functions of Linkage Menu> 93