FUTABA T12K Instruction Manual page 10

Micro SD Card (Commercial Product) Handling Precautions
WARNING
Never disassemble or modify the micro SD card.
Do not unreasonably bend, drop, scratch or place
heavy objects on the micro SD card.
If smoke or an abnormal odor emanates from the
card, immediately turn off the transmitter power.
CAUTION
Since the micro SD card is an electronic device,
be careful of static electricity.
■ Static electricity may cause erroneous operation.
Do not use the micro SD card near radio and
television sets, audio equipment, motors and other
equipment that generates noise.
■ Doing so may cause erroneous operation.
Do not store the micro SD card in the following places:
・ Where the humidity is high
・ Where the temperature difference is severe
・ Where it is very dusty
・ Where the card will be exposed to shock and vibration
・ Near speakers and other magnetic devices
Storage and Disposal Precautions
WARNING
Keep wireless equipment, batteries, aircraft, etc.
away from children.
CAUTION
Do not store wireless devices in the following places:
・ Where it is extremely hot (40℃ [104F] or higher) or cold (-10℃
[14F] or lower)
・ Where the equipment will be exposed to direct sunlight
・ Where the humidity is high
・ Where vibration is prevalent
・ Where it is very dusty
・ Where the device may be exposed to steam and heat
Other Precautions
CAUTION
Do not directly expose plastic parts to fuel, oil,
exhaust gas, etc.
■ If left in such an environment, the plastic may be
attacked and damaged.
■ Since the metal parts of the case may corrode, always
keep them clean.
Join the Academy of Model Aeronautics.
■ The Academy of Model Aeronautics (AMA) provides
guidelines and liability protection should the need arise.
Always use genuine Futaba products such as
transmitter, receiver, servo, ESC, battery, etc.
10 <Introduction>
*Read the instruction manual supplied
with the micro SD card for details.
Do not use the micro SD card where it may be
exposed to water, chemicals, oil, or other fluids.
■ Doing so may cause a fire or electric shock by short
circuiting.
Do not insert foreign matter into the transmitter
card slot.
■ Doing so will cause trouble.
Do not expose the card to shock and vibration
and do not remove the card from the card slot while
data is being written or read.
■ The data may be damaged or lost.
●Recorded data
The data recorded on the micro SD card cannot be
compensated regardless of the contents or cause of the
trouble or obstruction.
Futaba does not perform data restoration or recovery work.
When the device will not be used for a long time,
remove the battery from the transmitter and aircraft
and store them in a dry place where the temperature
is between 0C and 30C [32F and 86F].
■ Left standing 'as is' may cause battery deterioration,
liquid leakage, etc.
■ Futaba is not responsible for damage sustained by
combination with other than Futaba Genuine Parts.
Use the parts specified in the instruction manual and
catalog.
This product SHOULD NOT be used for devices
that are directly related to human life, and those that
could be harmful to the human body, such as the
applications below.
(1) Medical Devices
(2) Aerospace/Aviation Related Devices
(3) Nuclear Devices, etc.