Aileron Differential - FUTABA 10J Instruction Manual

Aileron differential
AIL-DIFF
Function
The left and right aileron differential can be
adjusted independently. This function is restricted
to 2 servo aileron.
NOTE：Aileron Differential cannot be used simultaneously with Flaperon or Elevon. If
another function is already active, Others WING mix ON is displayed on the screen. After
setting the active function to INH , set the Aileron Differential function to ACT .
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
ACT/INH
Aileron1 （ CH1） rate
Aileron2 （ CH7） rate
● Select the setting item with
the Jog key.
Aileron Differential
■ Activating the function
① Select the "MIX" item and then
select the "ACT" by pressing
the + key or ‒ key.
＋ −
or
● W h e n y o u d o n o t u s e a
function, set to the "INH"
side.
② Select
"AIL-DIFF"
from the menu with the
Jog key.
■ Aileron rate
② Select the "RATE-AIL1" item and move
the aileron stick to the left and right
and adjust the travel of each servo by
pressing the + key or ‒ key.
Range：-120 ∼ +120%
Default：+100%
● When you want to return to the initial value, press the + key
and ‒ key simultaneously. However, when the polarity is
changed only the number returns to the initial value.
（Adjust the "RATE-AIL2" item in the same way as ② .）
(ACROBATIC)
CH1
③ Open the setting screen by
pressing the Jog key.
● W h e n I N H i s s e l e c t e d , t h e
function cannot be used. To use
the function, select ACT.
（Aileron）
L：Aileron stick Left side rate
R：Aileron stick Right side rate
＋ −
or
CH7
97