FUTABA T12K Software Update Manual

1M23Z06202
[Updating procedure]
1. micro SD card format
1. You will first want to format your micro SD card
to the T12K. If you are using an existing micro SD
card, any data previously saved to it will be deleted
during the "format". We suggest you either save
this data on your computer or purchase a new card.
T12K:
① Push to open.
②Slide in the direction of the
arrow on the battery cover.
③ micro SD card is inserted in a slot
by direction of a figure.
*It is releasable if a card is pushed once again.
T12K SOFTWARE UPDATE MANUAL
2. After inserting the new micro SD
card into the transmitter, turn
on the power switch. You will
see the word "FORMAT" if you
have not previously used this
card in the transmitter.
3. Please select "YES" and touch
"RTN".
4 . T h e f o l l o w i n g s c r e e n i s
displayed during formatting.
5. When the format is completed,
t h e f o l l o w i n g s c r e e n i s
displayed.
6. Turn off the power switch and
remove the micro SD card from
its slot.
- 1 -