Condition delay setting
(Setup screen page 2)
1. Select the condition which you want to set.
2. Move the cursor to the "DELAY" icon of the
channel you want to set and push the RTN
button to switch to the data input mode.
Adjust the delay amount by scrolling the Push
dial.
Initial value: 0
Adjustment range: 0~27 (maximum delay)
3. Push the RTN button to end adjustment and
return to the cursor mode.
Condition Vibrator
When the condition is changed, it informs by
the vibrator.
The vibration patterns (4 types)
TYPE 1
TYPE 2
TYPE 3
TYPE 4
*Condition after switching, the vibrator is activated
by a slight delay.
<Model Menu (Common Functions)>
128