Grip - Panasonic AU-EVA1E Operating Instructions Manual

Grip

The grip is already mounted to the camera.
Mounting the grip
1
Insert the grip to the camera. (Fig. 1)
f Align the mount reference points on the grip mounting section of the camera and the grip mounting section of the grip when inserting into the
camera.
2
Slowly turn the grip counter-clockwise until it clicks. (Fig. 2)
3
Connect the grip cable to the <REMOTE> terminal. (Fig. 3)
4
Fix the grip cable with the grip cable clamp. (Fig. 3)
NOTE
@
t If it does not mount correctly, perform the mounting from the beginning. Do not apply excessive force to the grip and the camera.
t Store the grip cable inside the grip cable clamp. If it is not stored, the cable may fly out to bottom when the angle of grip is changed, or it may get
caught when mounting a tripod.
Chapter 3 Preparation — Mounting accessories
Mount reference points
Fig. 1
<REMOTE> terminal
Grip cable
Fig. 2
Grip cable clamp
Fig. 3
– 32 –