Operating The Menu - Panasonic AU-EVA1E Operating Instructions Manual

Operating the menu

Various settings are possible from the menu.
There are two methods of operation, a method to operate with the multidial or grip multidial, or a method to touch the LCD monitor.
When operating with the multidial
Operate the multidial on the camera by turning it in vertical direction or pushing it.
1
Press the <MENU> button when not recording.
The menu is displayed.
2
Select the menu to set.
1) Turn the multidial to move the cursor to the menu to set.
2) Press the multidial.
The lower level menu will open.
f The confirmation screen is displayed depending on the menu.
f Perform the similar operation if there is next level.
f In some menus, a screen to set the numeric value is displayed in the VIEW screen (Fig. 2).
f In some menus, a message is displayed if a menu cannot be executed.
f To return to one level higher, press the <EXIT> button.
3
Select the item to set.
1) Turn the multidial to move the cursor to the item to set.
2) Press the multidial.
A check mark is displayed at the left of the set item. (Fig. 1)
f To return to one level higher, press the <EXIT> button.
4
Press the <MENU> button to close the menu.
f Depending on the operating item, it will automatically return to the previous screen.
@ NOTE
t In a screen to set the numeric value (Fig. 2), turn the multidial in your desired direction with the multidial pushed in, and hold it to change the value
with high speed.
t The grip multidial operates equally as the multidial on the camera.
Chapter 4 Operation — Basic operation of the menu
Fig. 1
– 66 –
Fig. 2