Lens Cap And Grip Belt; Attaching The Shoulder Strap; Inserting A Cassette - Panasonic NV-DS27 Operating Instructions Manual

2
1
1
2
1
2
1
EJECT
<
3
1
PUSH LOCK
R E C
SAVE

Lens Cap and Grip Belt

To protect the Lens surface, attach the Lens Cap. Adjust the length of the
1
Grip Belt to the size of your hand.
1
Attach the Lens Cap to the Grip Belt.
2
Put your hand through the Grip Belt and adjust the length.
≥The removed Lens Cap can be hooked onto the Grip Belt
not recording, be sure to keep the Lens Cap attached to the Lens for
protection.)
~~~~~~~~~~~~~~~~~~~~~~~~~

Attaching the Shoulder Strap

We recommend that you attach the Shoulder Strap before going out of doors
to record so as to avoid dropping the Movie Camera.
1
Pull the end of the Shoulder Strap through the Shoulder
Strap Holder on the Movie Camera.
2
Fold the tip of the Shoulder Strap, run it through the
Shoulder Strap Length Adjuster, and pull it.
≥Pull it out more than 2 cm
so that it cannot slip off.
~~~~~~~~~~~~~~~~~~~~~~~~~

Inserting a Cassette

When power is supplied to the Movie Camera, the Cassette can be taken out
without turning the Movie Camera [ON].
1
Slide the [<EJECT] Lever to open the Cover.
2
Insert a Cassette.
3
Close the Cover and press the [PUSH LOCK] Button to lock
the Cover.
ª Accidental Erasure Prevention
Opening the accidental erasure prevention slider
sliding it in the [SAVE] arrow direction) prevents recording. To enable
recording, close the accidental erasure prevention slider (by sliding it in the
[REC] arrow direction).
≥For other notes concerning this item, see page 39.
3
1
1
from the Shoulder Strap Length Adjuster
1
on the cassette (by
.(When you are
11