Panasonic AU-EVA1E Operating Instructions Manual page 88

[OFF]
(Factory setting: [OFF])
[INDICATOR DISP]
Displays/hides the item set in [SDI/HDMI INDICATOR] for the output from the <HDMI> terminal.
[ON]
[OFF]
(Factory setting: [ON])
@ NOTE
t This is not displayed in the output from the <HDMI> terminal when the menu is displayed in the LCD monitor.
[MARKER DISP]
Set if the marker set in [SDI/HDMI MARKER] is to be displayed or not in the output from the <HDMI> terminal.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[MENU DISP]
Sets if the menu is displayed or not in the output from the <HDMI> terminal.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
NOTE
@
t Even if [MENU DISP] is set to [OFF], the menu is displayed in the output from the <HDMI> terminal during the thumbnail screen.
[SDI/HDMI INDICATOR]
Selects the indicator to display in the output image from the <SDI OUT> terminal or the output image from the <HDMI> terminal.
To display, set the [OUTPUT SETTINGS] menu → [SDI OUT] → [INDICATOR DISP] and the [OUTPUT SETTINGS] menu → [HDMI OUT] →
[INDICATOR DISP] to [ON].
For content of display, refer to "Screen status display".
[CLIP NAME]
Displays/hides file name of the clip to record. Displays maximum of 8 characters from beginning.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[PIXEL/FREQ]
Displays/hides the number of recorded pixels and system frequency of the main recorder.
The display contents differ depending on the setting in the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [MAIN PIXEL] and [SENSOR MODE].
f When [SENSOR MODE] is set to [S35 MIX 2.8K]: [2048 MIX] and [1920 MIX] are additionally displayed.
f When [SENSOR MODE] is set to [4/3 CROP&MIX 2.2K]: [2048 CROP] and [1920 CROP] are additionally displayed.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[MAIN COLOR]
Displays/hides the color setting of the video to be recorded in the main recorder.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[REC FORMAT]
Displays/hides recording codec of the main recorder.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[SLOT1/2 STATUS]
Displays/hides the status of the card slot and remaining recordable capacity.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[2 SLOTS FUNC.]
Displays/hides the setting in the [REC SETTINGS] menu → [2 SLOTS FUNC.].
Chapter 4 Operation — Menu setting contents
Does not control the recording operation of the external equipment.
Displays the shutter speed, remaining battery level, etc. Content of display follows the setting in [SDI/HDMI INDICATOR].
Hides all.
– 88 –