Table of Contents
Advertisement
@
NOTE
t When the [SYSTEM SETTINGS] menu → [SENSOR MODE] → [4/3 CROP&MIX 2.2K] is set
- The sensitivity will be lower than when [S35 5.7K] or [S35 MIX 2.8K] is set.
- [400 ISO] or [1250 ISO] can be set in the [SYSTEM SETTINGS] menu → [EI] → [NATIVE ISO].
[MAIN PIXEL]
Sets the main recorder's number of recording pixels.
The items that can be set are as follows.
f [4096x2160], [3840x2160], [2048x1080], [1920x1080], [1280x720]
(Factory setting: [4096x2160])
[MAIN CODEC]
Sets the recording codec of the main recorder.
f MOV file
[420LongGOP 150M]
[420LongGOP 100M]
[420LongGOP 50M]
[422LongGOP 150M]
[422LongGOP 100M]
[422LongGOP 50M]
f AVCHD file
[AVCHD PS]
[AVCHD PH]
[AVCHD HA]
[AVCHD PM]
(Factory setting: [422LongGOP 150M])
[COLOR SETTINGS]
[MAIN]
Sets the colors of videos (entire camera system) recorded in the main recorder.
[V-Log]
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
(Factory setting: [V-Log])
[SDI OUT]
Sets the output image from the <SDI OUT> terminal.
f When [MAIN] in [COLOR SETTINGS] is set to [V-Log]
[V-Log]
[V-709]
f When [MAIN] in [COLOR SETTINGS] is set to [SCENE1], [SCENE2], [SCENE3], [SCENE4], or [SCENE5]
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
(Factory setting: [V-Log])
[HDMI OUT]
Sets the output image from the <HDMI> terminal.
f When [MAIN] in [COLOR SETTINGS] is set to [V-Log]
[V-Log]
[V-709]
f When [MAIN] in [COLOR SETTINGS] is set to [SCENE1], [SCENE2], [SCENE3], [SCENE4], or [SCENE5]
[SCENE1], [SCENE2], [SCENE3],
[SCENE4], [SCENE5]
(Factory setting: [V-Log])
[LCD OUT]
Sets the output image from the <LCD> terminal.
f When [MAIN] in [COLOR SETTINGS] is set to [V-Log]
[V-Log]
Chapter 4 Operation — Menu setting contents
4:2:0 (8 bits) LongGOP 150 Mbps
4:2:0 (8 bits) LongGOP 100 Mbps
4:2:0 (8 bits) LongGOP 50 Mbps
4:2:2 (10 bits) LongGOP 150 Mbps
4:2:2 (10 bits) LongGOP 100 Mbps
4:2:2 (10 bits) LongGOP 50 Mbps
4:2:0 (8 bits) LongGOP 25 Mbps
4:2:0 (8 bits) LongGOP 21 Mbps
4:2:0 (8 bits) LongGOP 17 Mbps
4:2:0 (8 bits) LongGOP 8 Mbps
Sets to the gamma curve that can achieve gradation and wide latitude (exposure range). A grading process after recording is
required.
Sets to setting to perform detailed image quality adjustment with the camera.
When [SCENE1] to [SCENE5] is selected, the menu setting for the same scene number is enabled in the [SCENE FILE
SETTINGS] menu.
Outputs with the same color as the video recorded in the main recorder.
Outputs by converting to a color comparable to the standard CINE-LIKE. This is the setting appropriate for preview.
Outputs with the same color as the video recorded in the main recorder. This cannot be changed.
Outputs with the same color as the video recorded in the main recorder.
Outputs by converting to a color comparable to the standard CINE-LIKE. This is the setting appropriate for preview.
Outputs with the same color as the video recorded in the main recorder. This cannot be changed.
Outputs with the same color as the video recorded in the main recorder.
– 69 –
Advertisement
Table of Contents
