Auto Black Balance - Panasonic AU-EVA1E Operating Instructions Manual

[NORMAL2]
[CENTER]
(Factory setting: [NORMAL1])
[A. IRIS PEAK/AVE]
Sets the ratio included in the peak for auto iris standard.
The items that can be set are as follows.
f [0]...[100]
(Factory setting: [30])
[GRIP IRIS]
Sets the control direction when the grip multidial is used to control the iris.
[RIGHT OPEN]
[LEFT OPEN]
(Factory setting: [RIGHT OPEN])
[AF OFFSET]
Offsets the focal position of the auto focus with + (further)/− (closer).
The items that can be set are as follows.
f [−20]...[20]
(Factory setting: [0])
[IR SHOOTING]
Enables/disables the IR recording.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[E.I.S.]
[SW]
Enables/disables the electronic image stabilization function.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[ZOOM POSITION DATA]
Sets the focal distance of the lens required for the electronic image stabilization.
[AUTO]
[MANUAL]
@ NOTE
t When setting to [AUTO], an EF lens supporting the acquisition of the focal distance with the communication between the camera and the lens is
required.
For the latest information regarding the EF lens supporting the acquisition of the focal distance information with the communication between the
camera and the lens, refer to the support desk at the following website.
http://pro-av.panasonic.net/
[ZOOM POSITION VALUE]
Sets the focal distance (mm) used when [ZOOM POSITION DATA] is set to [MANUAL].
The items that can be set are as follows.
f [8]...[200]
@ NOTE
t The electronic image stabilization will not operate properly when set to distance that is different from the focal distance of the EF lens.

[AUTO BLACK BALANCE]

[ABB]
Executes the adjustment of auto black balance.
[EXECUTE]
[EXIT]
Chapter 4 Operation — Menu setting contents
Window that is around bottom of the screen.
Window that is a spot around center of the screen.
The iris will open when the grip multidial is turned clockwise.
The iris will open when the grip multidial is turned counter-clockwise.
Performs the electronic image stabilization using the focal distance information automatically.
Performs the electronic image stabilization using the focal distance set in [ZOOM POSITION VALUE].
Executes automatic black balance.
Returns to one level higher
– 77 –