Table of Contents
Advertisement
[LCD MARKER]
[CENTER MARKER]
Switch the type of the center marker.
[1]
[2]
[3]
[4]
[OFF]
(Factory setting: [1])
[SAFETY MARKER]
Selects the type of frame for the safety zone marker.
[1]
[2]
[OFF]
(Factory setting: [OFF])
[SAFETY AREA]
Sets the size of the safety zone marker.
The items that can be set are as follows.
f [71.6%], [80%], [90%], [95%]
(Factory setting: [90%])
[FRAME MARKER]
Sets the aspect ratio of the frame marker. The frame marker is not displayed when [OFF] is selected.
The items that can be set are as follows.
f [1.33:1], [1.44:1], [1.56:1], [1.78:1], [1.85:1], [2.00:1], [2.201:1], [2.35:1], [2.39:1], [OFF]
(Factory setting: [OFF])
[FRAME COLOR]
Sets the color of the frame marker.
The items that can be set are as follows.
f [WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]
(Factory setting: [WHITE])
[PLAYBACK MARKER]
Displays/hides the marker against the playback video output from the <LCD> terminal
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[LCD FOCUS ASSIST]
[EXPAND MODE]
Sets the enlargement display function mode.
[10SEC]
[HOLD]
[UNTIL REC]
(Factory setting: [HOLD])
[EXPAND VALUE]
Adjusts the enlargement factor of the enlarged display function.
The items that can be set are as follows.
f [x2], [x3], [x4]
(Factory setting: [x2])
[PEAK./SQUARES MODE]
Enables/disables the peaking function and focus square display (focus assist function).
[PEAKING]
[SQUARES]
[PEAK./SQUARES]
(Factory setting: [SQUARES])
Chapter 4 Operation — Menu setting contents
+ (large)
Open center (large)
+ (small)
Open center (small)
Does not display.
Box
Corners
Does not display.
Disables the enlarged display function after ten seconds have elapsed.
The enlarged display function is enabled until the USER button assigned with [EXPAND] is pressed again.
Enables the enlarged display function until performing recording operation.
Enables the peaking display.
Enables the focus square display.
Enables peaking display and the focus square display. It will switch in the order of peaking display, focus square display, and
no display every time the USER button with [PEAK./SQUARES F.A.] assigned is pressed.
– 93 –
Advertisement
Table of Contents
