Table of Contents
Advertisement
Right side
1
2
3
4
5
6
7
1 LCD monitor unit mounting section
Mounts the included LCD monitor mounting attachment.
2 Handle
This is a removable handle.
Already mounted to the camera.
3 REC button
Starts or stops the recording.
4 <ND FILTER> button
Switches the ND filter by pressing the <+> button or the <−> button.
The set value can be checked in the ND filter display of the VIEW screen. Displayed contents of the ND filter display are as follows.
[ND:1.8]: Reduces the amount of light entering the MOS sensor to 1/64.
[ND:1.2]: Reduces the amount of light entering the MOS sensor to 1/16.
[ND:0.6]: Reduces the amount of light entering the MOS sensor to 1/4.
[ND:CLR]: The ND filter is not used.
5 <IRIS> dial
Controls the iris of the EF lens.
Turn upward: Controls toward closing.
Turn downward: Controls toward opening.
Press: Switches between <AUTO>/<MANU>.
6 <MENU> button
Displays the menu. Pressing the <MENU> button while the menu is displayed closes the menu.
7 <AWB>/<USER 6> button
Adjusts the white balance.
Also, this is also used as the USER button (USER6).
8 Accessory mounting section
The included LCD monitor mounting attachment can also be mounted.
9 <CH1> switch
Selects the method to adjust the audio input level for the <AUDIO INPUT 1> terminal.
<AUTO>: Adjusts automatically.
<MANU>: Adjusts with the <AUDIO LEVEL CH1> knob.
10 <AUDIO LEVEL CH1> knob
Adjusts the audio input level when the <CH1> switch is set to <MANU>.
11 <AUDIO LEVEL CH2> knob
Adjusts the audio input level when the <CH2> switch is set to <MANU>.
12 <CH2> switch
<AUTO>: Adjusts automatically.
<MANU>: Adjusts with the <AUDIO LEVEL CH2> knob.
13 Power lamp
Indicates the status of power. Illuminates in red when the power is on.
To flash the lamp or not can be set in the menu.
Chapter 2 Description of Parts — Camera
15
19
20 21
– 18 –
16
17
18
23
24
22
8
9
10
11
12
13
14
Advertisement
Table of Contents
