Table of Contents
Advertisement
[MULTI DIAL]
Sets if the multidial is to be locked or not with the <LOCK> switch.
[LOCK]
[UNLOCK]
(Factory setting: [LOCK])
[LED & FAN]
[TALLY LED]
Sets if the tally lamp is to illuminate or not.
[FRONT]
[REAR]
[BOTH]
[OFF]
(Factory setting: [BOTH])
[ACCESS LED]
Sets if the card access lamp is to illuminate or not.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[POWER LED]
Sets if the power lamp is to illuminate or not.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
@
NOTE
t It will illuminate approximately one second even if it is set to [OFF].
[FAN SPEED]
Sets the rotation speed of the fan.
[AUTO]
[FULL]
(Factory setting: [AUTO])
[LCD]
[BRIGHTNESS]
Adjusts the brightness of the LCD monitor.
The items that can be set are as follows.
f [−15]...[15]
(Factory setting: [0])
[COLOR LEVEL]
Adjusts the color level of the LCD monitor color.
The items that can be set are as follows.
f [−15]...[15]
(Factory setting: [0])
[CONTRAST]
Adjusts the contrast of the LCD monitor.
The items that can be set are as follows.
f [−30]...[30]
(Factory setting: [0])
[BACK LIGHT]
Adjusts the brightness of the LCD monitor backlight. [0] is the standard brightness.
When [POWER LCD] is assigned to the USER button and the function is enabled, the brightness will not change even when the setting of [BACK
LIGHT] is changed.
The items that can be set are as follows.
f [−1], [0], [1]
(Factory setting: [0])
Chapter 4 Operation — Menu setting contents
It will be locked.
It will not be locked.
The front tally lamp will illuminate.
The rear tally lamp will illuminate.
Both the front and rear tally lamps will illuminate.
The tally lamp will not illuminate.
It will rotate in slow speed until the specified temperature is reached, and then it will rotate in the same speed as [FULL]
when the specified temperature is reached.
It will always rotate in constant speed.
– 72 –
Advertisement
Table of Contents
