Table of Contents
Advertisement
4 EF lens mount
EF lens is mounted.
f The figure shows the status when the mount cap is attached. Remove the mount cap when the lens is to be mounted.
5 Lens lock unlock button
The lock is unlocked when the lens is to be removed from the camera.
6 Fan inlet
Fan inlet for cooling fan. Do not block this while the camera is being used.
Rear side
Following terminals, card slots, and card access lamps are inside the cover.
f <HDMI> terminal
f <USB2.0 HOST> terminal
f <SERVICE> terminal
f Headphone terminal
f <SDI OUT> terminal
f <TC IN/OUT> terminal
f <DC IN 12V> terminal
f Card slot 1/card slot 2
f Card 1 access lamp/card 2 access lamp
1 Card 1 access lamp
Indicates the access status for recording and playback of the SD card inserted in the card slot 1.
To flash the lamp or not can be set in the menu.
2 Card slot 1
Slot for SD card.
3 Card slot 2
Slot for SD card.
4 Card 2 access lamp
Indicates the access status for recording and playback of the SD card inserted in the card slot 2.
To flash the lamp or not can be set in the menu.
5 <SLOT SEL>/<USER 7> button
Selects the card slot to record to or playback from.
Also, this is also used as the USER button (USER7).
6 Rear tally lamp
Illuminates when the recording is started. Flashes when the battery level becomes low.
To flash the lamp or not can be set in the menu.
7 <AUDIO INPUT 1>/<AUDIO INPUT 2> terminal (XLR, 3-pin)
Connects an audio equipment or an external microphone.
8 <HDMI> terminal
A terminal to output video signal by connecting a monitor, etc.
9 <USB2.0 HOST> terminal
Can connect to wireless LAN when the wireless module (optional) compatible to camera is mounted.
Chapter 2 Description of Parts — Camera
8
9
1
2
3
4
5
6
14
10 11
12 13
15
16
17
– 20 –
7
Advertisement
Table of Contents
