Table of Contents
Advertisement
When operating by touching the LCD monitor
Operate by touching the LCD monitor.
1
Press the <MENU> button when not recording.
The menu is displayed.
f VIEW menu screen is also displayed by touching the LCD monitor for one second or more and releasing while the screen is displayed.
2
Select the menu to set.
f Touch the menu to set. The lower level menu will open.
f The confirmation screen is displayed depending on the menu.
f Perform the similar operation if there is next level.
f In some menus, a screen to set the numeric value is displayed in the VIEW screen.
To change the numeric value, touch [`]/[{] and change the setting value.
f In some menus, a message is displayed if a menu cannot be executed.
f The cursor is moved up or down by touching [`]/[{].
f To return to one level higher, touch
3
Select the item to set.
f Touch the item to set. A check mark is displayed at the left of the set item.
f To return to one level higher, touch
4
Exit from the menu by touching
f Depending on the operating item, it will automatically return to the previous screen.
Initializing the menu
The menu can be returned to the factory setting condition.
1
Select the [SYSTEM SETTINGS] menu → [INITIALIZE] → [LOAD FACTORY DATA].
The setting value of the menu is returned to the factory setting.
Chapter 4 Operation — Basic operation of the menu
.
.
, or pressing the <MENU> button.
– 67 –
Advertisement
Table of Contents
