Operating Each Screen - Panasonic AU-EVA1E Operating Instructions Manual

[COLOR]
When [COLOR] is selected in the HOME screen, the COLOR screen is displayed allowing to set the color of the image (gamma and gamut).
[MAIN COLOR]: Sets the color of video recorded in the main recorder (entire camera system).
[SDI OUT]: Sets the output image from the <SDI OUT> terminal.
[HDMI OUT]: Sets the output image from the <HDMI> terminal.
[LCD OUT]: Sets the output image from the <LCD> terminal.
@ NOTE
t [SDI OUT]/[HDMI OUT]/[LCD OUT] settings
- When [MAIN COLOR] is set to [V-Log]
You can select [V-Log] or [V-709].
- When [MAIN COLOR] is set to [SCENE1] to [SCENE5]
Setting will be same as [MAIN COLOR].
[SHUTTER]
When [SHUTTER] is selected in the HOME screen, the VIEW screen is displayed, allowing to set the shutter speed.
f Select from the previously registered shutter speed setting values in [`]/[{].
f The shutter speed setting value can be added/deleted in the [CAMERA SETTINGS] menu → [SHUTTER] → [ADD deg]/[ADD sec]/[DELETE deg]/
[DELETE sec]. Maximum of 12 setting values can be registered.
@ NOTE
t This function cannot be set when the [CAMERA SETTINGS] menu → [SHUTTER] → [SW] → [OFF] is set.
[EI]
When [EI] is selected in the HOME screen, the VIEW screen is displayed, allowing to set the EXPOSURE INDEX (gain).
f Set EXPOSURE INDEX (gain) with [`]/[{].
[AUDIO]
When [AUDIO] is selected in the HOME screen, the AUDIO screen is displayed, allowing to set the shutter speed.
[CH1 IN]: Sets the audio to be recorded in the audio channel 1.
[CH2 IN]: Sets the audio to be recorded in the audio channel 2.
[INPUT1 SEL]: Sets the audio input signal from the device connected to the <AUDIO INPUT 1> terminal.
[INPUT2 SEL]: Sets the audio input signal from the device connected to the <AUDIO INPUT 2> terminal.
Chapter 4 Operation — Operating each screen
– 62 –