Table of Contents
Advertisement
Displaying the HOME screen
Status of the camera can be confirmed.
1
2
4
5
1 [FPS]
Displays the setting status of the variable frame rate recording function and the recording frame rate.
2 [COLOR]
Displays the color setting of the video recorded to the main recorder.
3 [SHUTTER]
Displays the shutter speed.
[sec]: Displays in time.
[deg]: Displays at shutter open angle.
4 [EI]
Displays the EXPOSURE INDEX (gain).
[ISO] and [dB] can be switched with the [CAMERA SETTINGS] menu → [EI] → [MODE].
5 [AUDIO]
Displays the status of the audio input for audio channel 1 and the audio channel 2.
[IN1]: The <AUDIO INPUT 1> terminal is selected as the audio input.
[IN2]: The <AUDIO INPUT 2> terminal is selected as the audio input.
[MIC]: An external microphone is selected as the audio input.
[LINE]: An audio device is selected as the audio input.
[INT(L)]: The built-in microphone <L> is selected as the audio input.
[INT(R)]: The built-in microphone <R> is selected as the audio input.
[48V]: The external microphone power supply is enabled.
6 [WB]
Displays the color temperature (white balance).
In case of the preset list acquired by the auto white balance, the color temperature is displayed with [A] at the beginning.
[ATW]: Displays while the auto white balance is operating.
[ATW LOCK]: Displays when the auto white balance is locked.
7 Number of recorded pixels/system frequency
Displays the number of recording pixels and the system frequency.
8 Pre-recording status display
Displays the re-recording status.
: When the [REC SETTINGS] menu → [PRE REC] → [ON] is set and pre-recording is enabled
(No display): When the [REC SETTINGS] menu → [PRE REC] → [OFF] is set, or when pre-recording is unable
9 Card slot 1/card slot 2 status display
Indicates the insertion status, current recording target, and remaining recordable capacity of the SD card.
: When the SD card is inserted, and it is set as the recording target
: When the SD card is inserted, but it is not set as the recording target
[0min]...[999min]: Remaining recordable capacity (0 - 999 minutes, 999 minutes or more is displayed as [999min])
[END]: When there is no remaining recordable capacity
[WP]: When the write protect switch of the SD card is set to the LOCK side
[!SDXC]: When the SDHC memory card is inserted, and the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [MAIN CODEC] is set to a file in
MOV format (displayed in red)
[ERR]: When a recording media that cannot be recorded is inserted (displayed in red)
(No display): When the SD card is not inserted
10 Special recording function display
Displays the setting and enable/disable status of the special recording function of each card slot.
[RELAY]: When set to relay recording
[SIMUL]: When set to simultaneous recording
11 Wireless LAN connection status display
Displays the connection status of the wireless LAN.
(No display): When the [NETWORK SETTINGS] menu → [NETWORK SEL] → [OFF] is set
: When ROP is not connected
: When ROP is connected
Chapter 4 Operation — Displaying the HOME screen
3
7
6
13
14
– 59 –
8
9
15
16
10
11
12
17
18
Advertisement
Table of Contents
