[Network Settings] Menu - Panasonic AU-EVA1E Operating Instructions Manual

[NETWORK SETTINGS] menu

Sets the setting regarding the network function.
[NETWORK SEL]
Sets if the external equipment (PC, etc.) and the camera is to be connected to the network using the wireless LAN.
[WLAN]
[OFF]
(Factory setting: [OFF])
[NETWORK FUNC]
[USER ACCOUNT]
Sets the user account to be used for authentication in the network function of the camera.
[ADD]
[DELETE]
[NETWORK PROPERTY]
[MAC ADDRESS]
Displays the wireless LAN MAC address of the camera. (Cannot be changed)
[TYPE]
Sets the connection method to the wireless LAN.
[DIRECT]
[INFRA(SELECT)]
[INFRA(MANUAL)]
(Factory setting: [DIRECT])
[SSID]
Enters or displays the network name of the camera (SSID).
(Factory setting: [AU-EVA1])
[BAND]
Switches between two communication methods ([2.4GHz] or [5GHz]) when [NETWORK PROPERTY] → [TYPE] → [DIRECT] is selected.
The items that can be set are as follows.
f [2.4GHz], [5GHz]
(Factory setting: [2.4GHz])
[CHANNEL(2.4GHz)]
Sets the channel to be used when connected to the wireless LAN with following items set.
f The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [TYPE] → [DIRECT]
f The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [BAND] → [2.4GHz]
The items that can be set are as follows.
f [AUTO], [CH1], [CH6], [CH11]
(Factory setting: [AUTO])
[CHANNEL(5GHz)]
Sets the channel to be used when connected to the wireless LAN with following items set.
f The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [TYPE] → [DIRECT]
f The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [BAND] → [5GHz]
The items that can be set are as follows.
f [AUTO], [CH36], [CH40], [CH44], [CH48], [CH100], [CH104], [CH108], [CH112], [CH116], [CH132], [CH136], [CH140], [CH149], [CH153], [CH157],
[CH161], [CH165]
(Factory setting: [AUTO])
@ NOTE
t Some items may not be able to select depending on the used wireless module.
[ENCRYPTION]
Sets the encryption method when [NETWORK PROPERTY] → [TYPE] → [INFRA(SELECT)]/[INFRA(MANUAL)] is selected.
The items that can be set are as follows.
f [WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE]
(Factory setting: [WPA2-AES])
Chapter 4 Operation — Menu setting contents
Connects with wireless LAN.
Does not connect.
Newly registers the user account. It is set as follows when not registered.
User account name: "guest", password: "auguest"
Deletes the registered user account. This will not operate when not registered.
It can connect directly without using a wireless access point to a device equipped with wireless LAN such as a tablet
terminal.
Connects to the wireless access point. The access point is selected from the list.
Connects to the wireless access point. Wireless access point is entered manually.
– 96 –