Table of Contents
Advertisement
t The recording is stopped once when the recording time reaches ten hours, and recording is automatically resumed after few seconds. Image and
audio during the pause will not be recorded. This includes the case of special recording, such as relay recording.
t Protection by DVD recorders will be automatically removed from SD cards that are AVCHD protected.
Handling of the recording data
Example of folder structure of SD card
1 SD card volume label
2 Video data in MOV format: 4K (4096×2160), 59.94P MOV (audio: LPCM)
3 Video data in MOV format: UHD (3840×2160), 29.97P MOV (audio: LPCM)
4 Management file 1
5 Management file 2
6 Thumbnail of video data
7 Video data in AVCHD standard (00000.MTS, etc.)
8 Management folder
The recording data in MOV format is related with the folder structure and the management files as shown in the figure. If these information is changed or
deleted even partially, an error such as that the data may not be recognized as the MOV data, or the recording becomes impossible will occur.
AVCHD formatted recording data includes not only video and audio data, but also various important data, and they are related in a folder structure as
shown in the figure. If such information is changed or deleted even partially, an error may occur, such as that the data may not be recognized as the
AVCHD data, or the SD card may not be used on the AVCHD device.
NOTE
@
t Do not erase the folder or file in the SD card with a PC. It may make it impossible to read on the camera.
t An error may occur such as that the SD card will not be recognized or data will not be recorded in the SD card when data is recorded in the SD card
by a PC.
t The SD card to be used on the camera should always be formatted on the camera.
t Number of the AVCHD format clips that can be recorded on a single SD card is approximately 3900.
Data will not be able to record when it reaches the maximum number of data that can be recorded.
Volume label of the SD card
The value set in the [REC SETTINGS] menu → [CLIP NAME] is stored in the volume label in CAM INDEX + NEXT REEL COUNT format when the SD
is formatted. Once it is stored, [NEXT REEL COUNT] will increase by one. Stored REEL COUNT is also used for the REEL number of the MOV format
file name.
NOTE
@
t When recorded to the SD card with CAM INDEX+REEL COUNT not recorded in the volume label, the value set in the [REC SETTINGS] menu →
[CLIP NAME] is automatically stored in the volume label, and [NEXT REEL COUNT] will increase by one.
Folder name of the MOV format video data
The fourth through eighth characters of the folder name differ depending on the setting of the camera.
Chapter 3 Preparation — Preparing the SD card
B002
PRIVATE
PANA_GRP
001QAQAM
002RCQAM
BACKUP.TMP
INDEX.DAT
AVCHD
AVCHDTN
BDMV
PANA_EXT
1
2
3
0
0
1
Q
A
– 47 –
1
2
3
4
5
6
7
8
4
5
6
Q
A
M
7
Advertisement
Table of Contents
