Recording Function That Cannot Be Used Simultaneously - Panasonic AU-EVA1E Operating Instructions Manual

Recording function that cannot be used simultaneously

Depending on the recording function that is set, there are recording functions that cannot be used simultaneously.
f Meaning of the symbols used in the table are as follows.
- l: Can be used simultaneously.
- —: Cannot be used simultaneously.
Recording function to
additionally set
Pre-recording* *
1 2
Relay recording
Simultaneous recording
VFR* *
3 4
*1 Time code is fixed to free run.
*2 The pre-recording is cancelled once when three hours has passed without starting the recording.
*3 Cannot set simultaneously in the following cases.
f When recording in AVCHD format
*4 Time code is fixed to recording run.
*5 The function will not operate if the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SENSOR MODE] is set to [S35 MIX 2.8K] or [4/3 CROP&MIX 2.2K].
Chapter 9 Notes — Recording function that cannot be used simultaneously
Pre-recording* *
1 2
l
l
—
Recording function that is set
Relay recording Simultaneous recording
l
—
l*
5
– 165 –
VFR*
l
—
l*
l*
l*
5
*
3 4
—
5
5