Creating A Vlan - ZyXEL Communications XGS2210-28 User Manual

6.3.2 Creating a VLAN

Follow the steps below to configure port 2 as a member of VLAN 102.
Access the web configurator through the Switch's management port.
1
Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click Apply to save the settings to
2
the run-time memory.
Figure 37 Tutorial: Set VLAN Type to 802.1Q
Click Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup.
3
In the Static VLAN screen, select ACTIVE, enter a descriptive name (VLAN 102 for example) in the Name
4
field and enter 102 in the VLAN Group ID field. Use the default VLAN type, Normal, in the VLAN Type field.
Select Fixed to configure port 2 to be a permanent member of this VLAN.
5
Clear the TX Tagging check box to set the Switch to remove VLAN tags before sending.
6
Click Add to save the settings to the run-time memory. Settings in the run-time memory are lost when the
7
Switch's power is turned off.
Chapter 6 Tutorials
XGS2210 Series User's Guide
54