ZyXEL Communications XGS2210-28 User Manual page 256

Figure 194 Advanced Application > AAA > AAA Setup
The following table describes the labels in this screen.
Table 104 Advanced Application > AAA > AAA Setup
LABEL DESCRIPTION
Authentication Use this section to specify the methods used to authenticate users accessing the Switch.
Privilege Enable These fields specify which database the Switch should use (first, second and third) to
authenticate access privilege level for administrator accounts (users for Switch management).
Configure the access privilege of accounts via commands (See the CLI Reference Guide) for
local authentication. The TACACS+ and RADIUS are external servers. Before you specify the
priority, make sure you have set up the corresponding database correctly first.
You can specify up to three methods for the Switch to authenticate the access privilege level
of administrators. The Switch checks the methods in the order you configure them (first Method
1, then Method 2 and finally Method 3). You must configure the settings in the Method 1 field. If
you want the Switch to check other sources for access privilege level specify them in Method 2
and Method 3 fields.
Select local to have the Switch check the access privilege configured for local authentication.
Select radius or tacacs+ to have the Switch check the access privilege via the external servers.
Chapter 25 AAA
XGS2210 Series User's Guide
256